2008/6 EC110NIIV30-2A TON TOSHIBA

2 x 2006/8 EC110NIIV30-2A TON TOSHIBA LIQUID SILICONE PACKAGES.

Manufacturer: Toshiba Machine
Year: 1-2008/1-2006
Model: EC110NIIV30-i2A

Injection Unit
Screw Diameter: 32 mm
Injection Volume: 102 cm3
Injection Pressure: 29008 psi
Holding Pressure: 29008 psi
Injection Rate (max): 221 cm3/s
Injection Speed: 275.0 mm/s
Maximum Screw Speed: 390 min 1

Clamp:
Clamping Force: 110 US-Ton
Distance Between the Rods (HxV): 18.1x16.1 in
Platen Dimensions (HxV): 26.0x24.0
Clamp Stroke: 13.8 in
Open Daylight (max): 31.5 in
Closed Daylight (min/mold): 7.1~17.1 in
Ejection Force: 3.3 US-Ton
Ejector Stroke: 3.54 in

Machine Dimensions (LxWxH): 14.1x4.3x5.6
Machine Weight: 4.6 US-Ton

Model 631 Air Powered Proportionally Controlled Liquid Silicone Meter-Mix Unit

Specifications: Advantages:

1:1 Fixed Material Ratio
1700 PSI Maximum Feed Pressure
150cc Maximum Shot Size (75cc per cylinder)

Programmable Feed Pressure

Single acting design with proportional control will give absolutely repeatable pressure at barrel inlet. This design removes any possibility of feed pressure variations affecting injection press shot size.
• Refill rate tied to A & B transducers assure never drawing vacuum during refill.
• Fewer valves than other designs, lowering cost and simplifying maintenance.
• Maximum refill time of 3 seconds with 2000 psi feed pump • pressure.
Reduced number of components in mixed material stream results in less cleaning and maintenance costs. (no fluid pressure regulator or interface shutoff valve is required)

Third stream program included as standard option.
Includes: PLC Control Panel, Hoses, Mixer & Manifold