INJECTION DEPOT
  • Home
    • Product Line Card
  • Used Equipment
    • Injection Moulding Machines >
      • Horizontal >
        • Arburg >
          • Use our Arburg Network
          • 2010 Arburg 570S 2200-400/170
        • Ube >
          • Use our Ube Network >
            • 1999 UBE UM 1000ton
            • 2000 UM720 UBE
            • 2010 UBE UZ 1500 Z-MAX Series
        • Boy >
          • Use our Boy Network
          • ​1991 Boy 50 Ton Machine
          • ​2013 BOY 55E & ​2014 BOY 100E
        • Engel >
          • Use our Engel Network
          • 1997 400 Ton Engel
          • 1997 ENGEL ES750
          • 1998 500-Ton Engel
          • 1999 990 WP Ton Engel Injection Molding Machine
          • 2000 ENGEL ES2750/500AH
          • 2001 ENGEL ES2750/500AH
          • 2004 550 Ton Engel
          • 2005 610 Ton Engel
          • 2006 Engel Speed 200/45 5.6 oz/ps​
          • 2008 Engel EVC 440/240
        • Husky >
          • Use our Husky Network
          • 1999 300 Ton Husky Injection Molding Machine
          • 2006 Husky Q2350 ILC Husky Injection Molding Machine
        • Mitsubishi >
          • Use our Mitsubishi Network
          • 1990 610 ton Mitsubishi
          • 1999 1450 TON MITSUBISHI 220 OZ
        • Nissei >
          • Use our Nissei Network
          • 1998 Nissei FN3000
          • 2006 400 TON NISSEI FN360-100A
        • Sumitomo >
          • Use our Sumitomo Network
          • USED 495 TON, 33.2 OZ SUMITOMO MODEL SE450HD- 1700 ELECTRIC INJECTION MOLDING MACHINE MFG NEW IN 2007
        • Toshiba >
          • 1997 ISG250N-10A Ton Toshiba
          • 1997 ISG500-Ton Toshiba
          • 1998 ISGT 950WV10-81AM Ton Toshiba
          • 2003 1430 TON TOSHIBA ISG1450D-110A
          • 2002 Toshiba ISF1750DV10-110A
          • 2000 TOSHIBA ISGS-610-WV10-59B
          • 2004 ISG950WV10-59B Toshiba
          • 2004 ISG950WV21-59B Toshiba
          • 2005 Toshiba ISGS390W
          • 2015 ISGS500WV50-27AT Toshiba
          • 2016 TIA110SV50-5A Toshiba
          • 2019 EC610SXIIV50-24AT Toshiba
        • WOOJIN >
          • 2014 650 TON WOOJIN DL650S
      • Vertical >
        • Milacron >
          • 2011 130ton Milacron Vertical Rotary
        • Engel >
          • 2001 150 Ton Engel ES330/150VV
          • 2014 50 Ton Engel
      • All Electric >
        • Nissei >
          • Use our Nissei Network >
            • 2005 198 TON NISSEI NEX4000-36E
        • Sumitomo >
          • Use our Sumitomo Network
          • 2007 495 TON Sumitomo Machine SE450HD
          • 2002 Used Sumitomo SE50D
        • TOSHIBA >
          • Use our Toshiba Network
          • 2018 610 TON TOSHIBAT EC610SX-36AT
          • 2017 1950 TON TOSHIBAT EC1950SX-155AT
          • 2016 500 TON TOSHIBAT EC500SX-26AT
          • 2007 TOSHIBA EC45V30-1.5Y
          • 2007 TOSHIBA EC110NIIV30-4A
          • ​2005 TOSHIBA EC240V21-8
          • 2004 ISG950WV21-59B Toshiba
          • 2004 Toshiba EC240V21-8Y
          • 2003 ALL ELECTRIC TOSHIBA EC310V21-8B
          • 2002 TOSHIBA ec500-26B
          • 2002 Toshiba EC65
          • 2003 Toshiba EC45
      • MULTI SHOT >
        • use our MULTI SHOT Network
      • LIM/RUBBER >
        • 2008/6 EC110NIIV30-2A TON TOSHIBA
      • Machines Sold >
        • Sold- 2016 ENGEL VICTORY 3550/560 TECH US
        • Sold 2011 ENGEL E-VICTORY 310/130
        • Sold 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2008 500 TON 56.8 OZ TOSHIBA EC500NVIIV30 26B
        • Sold - 2004 500 TON 56.7 OZ TOSHIBA EC500V21 26B
        • Sold - 2001 400 Ton Engel Injection Molding Machine
        • Sold -1999 750 Ton Engel Injection Molding Machine
        • Sold - 2-1997 110 Ton Nissei Injection Molding Machine
        • Sold - 2004 ENGEL ES 1050/200 TL
        • Sold - 2003 610 TON TOSHIBA ISG610V21-59B
        • Sold - 2012 143 TON TOSHIBA EC140SXV50-U34
        • Sold 2-1999 80 Ton Nissei Injection Molding Machine
        • Sold 2000 200 Ton JSW Injection Molding Machine
        • Sold 2000 500 Ton Husky Injection Moulding Machine
        • Sold 2000 2000 Ton Engel Injection Molding Machine
        • Sold 1998 238 Ton Nissei Injection Molding Machine
        • Sold 2000 154 Ton Nissei Injection Molding Machine
        • Sold 1996 250 Ton Engel Injection Molding Machine
        • Sold 2001 130 TON Battenfeld Injection Molding Machine
        • Sold 2002 110 TON Battenfeld Vertical/Vertical Injection Molding Machine
        • Sold 2001 90 Tons Engel Vertical/Vertical Injection Molding Machine
        • Sold 2002 125 Ton Vertical Engel Injection Molding Machine
        • Sold 1999 110 Ton BattenFeld Vertical / Vertical
        • Sold IMI Online Auction Closed
    • Robots >
      • Engel >
        • Use our Engel Network
        • 2005 Engel Servo Robot
      • Ranger >
        • Use our Ranger Robot Network
        • 2005 Ranger Robot
      • Yushin >
        • Use our Yushin Robot Network
        • Two 2008 ATB-150S Yushin Robots
        • 2010 RA-1300 Yushin Robot
      • Sepro >
        • 2006 Sepro Robot SR4030 S3
        • 2006 SEPRO Axess 10 S3 3-Axis Servo
        • 2011 SEPRO AXESS 33
    • Auxiliary >
      • Core Pull Valve Gate >
        • use our Valve Gate network
        • CPI Automation Ltd.
      • Air Compressor >
        • use our Air Compressor network
        • QUINCY QSF100-125 WITH PURESTREAM DRYER
      • Dryers >
        • Use our Dryers Network
        • Thermal-D Dryer THORESON MCCOSH INC.
        • 2010 Conair Courasel Dryer
        • 2012 Novatec 600 Dryer
        • 2013 NW-3800DC NOVATEC DRYER
        • 2017 Novatec / Dri-Air HP4-X 100 FM Drying System
      • Granulators >
        • use our Granulators network
        • 1997 Rapid Granulator
      • Temperature Control Units >
        • use our Temperature Control Units
        • 2005 Regloplas 150S Oil Temperature Controller
        • 2011 Gammaflux TTC-32795 Temperature Control Unit
        • 2014 Gammaflux G24-37394P
      • Hot Runner Controllers >
        • use our Hot Runner Controllers network
        • 2002 Acetronic MF-5Z
      • Chillers >
        • use our chiller network
        • 2004 AEC 20 Ton Air Cooled Chiller For Sale
        • ​2017 Frigel Microgel Rad 40/12
      • Conveyor & Separator
    • Miscellaneous >
      • (3) USED 5 GALLON 70 MIL SINGLE CAVITY BUCKET MOLD
    • Are You Selling Equipment? >
      • Are You Selling your IMM
      • Are You Selling your Robot?
      • Are You Selling your Dryer?
    • Looking for Used IMM
  • New Shibaura IMM
    • EC-SX Introduction
    • Customer Support >
      • Shibaura Training 2020
    • V70 Controller
    • Shibaura Machine Technical Center >
      • MoldTrial
    • Downloads >
      • FAQ
      • 15 Things to Know About Servo-Driven Injection Machines
      • Cycle Time Power
    • Shibaura Machine Warranty
    • Electric vs hydraulic
    • All Electric "Small" >
      • EC30SXII (30 Ton)
      • EC55SXIII (55 Ton)
      • EC85SXIII (83 Ton)
      • EC110SXIII (110 Ton)
      • EC140SXIII (143 Ton)
      • EC200SXIII (198 Ton)
      • EC250SXIII (253 Ton)
      • EC310SXIII (310 Ton)
      • EC390SXII (385 Ton)
    • All Electric "Medium/Large" >
      • EC500SXIII (500 Ton)
      • EC610SXIII (610 Ton)
      • EC720SXIII (720 Ton)
      • EC950SXIII (950 Ton) >
        • EC950SXIII (950 Ton) Specs
      • EC1100SXIII (1000 Ton)
      • EC1450SXIII (1300 Ton)
      • EC1950SXIII (1800 Ton)
      • EC2750SXIII (2500 Ton)
    • Machine Sizing
  • New Sepro Robots
    • Sepro Robot Introduction
    • Customer Support >
      • Sepro Training 2020
    • Sepro Controller
    • 3 Axis Robots >
      • Picker
      • Success
      • Strong
      • S5 Line
      • S5 Speed Line
      • S7 Line
    • 5 Axis Robots >
      • 5X Line
      • 7X Line
      • Success X
    • 6 Axis Robots >
      • Sepro - Stäubli
      • Sepro - Yaskawa
    • Sepro Media
    • Robot Sizing
  • Moretto Aux
    • Moretto Customer Support
    • Feeding and Conveying >
      • Single-Phase Hopper Loaders
      • Venturi Feeders
      • Containers - Receivers
      • Conveying sizing
    • Drying and Hot Air Drying >
      • Mini Dryers
      • X Dryer
      • Eureka (Central System)
      • OTX Hoppers >
        • OTX pictures
      • Sizing
    • Dosing & Blending >
      • Volumetric Dosing Units >
        • Volumetric Sizing
      • Gravimetric Dosing Units >
        • Gravimetric Dosing Sizing
    • Moisture meter
  • Cumberland-Plastics
  • Frigel-Plastics
    • Water Temperature Controllers >
      • Turbogel
      • HB-THERM THERMO-5
    • MACHINE-SIDE TCU/CHILLER COMBINATION >
      • MICROGEL WATER COOLED
      • MICROGEL MICROGEL™ AIR COOLED
      • MICROGEL/TURBOGEL SIZING APPLICATION
  • Moretto downloads
  • Magbo Magnetic Platens
    • Pictures
    • Magbo Sizing
    • Magbo Take The Challenge
  • MoldMasters
  • SRS Low Speed Grinders
    • SRS video
    • 5 Reasons Why You Need A SRS Bi-Cutter Screenless Granulator
    • SRS sizing
  • Intertek
  • Government Grant Initiative Program
  • Energy Saving Grants
  • NPE 2018
  • I.D Internal
  • IDG Members
Picture

Rules and Regulations 2021

Return to Play ASNB 2021

Participants (players, coaches, captains, umpires, and spectators)
At anytime within 2m a mask is mandatory
Every Person participating must maintain 3 meters from anyone person when not from same household
Team bench must be equal to the amount of physical distancing of 2m.
25% spectator capacity. Please avoid inviting spouses or family members where possible.
Maximum Individuals at the diamond 35 individuals again please limit the spectators to a minimum
Face coverings must be warn at all times if within 2m of each other. Unless from the same household
NO SINGING/ CHANTING/ CHEERING OR YELLING
NO SPITZ, SUNFLOWER SEEDS/ CHEWING TABACCO/ GUM or spitting
Not recommended to share bats, please sanitize where possible.
 No sharing of water bottles between Umpires and or players and refillable water bottles are strongly recommended.
ALL PLAYERS MUST remain 3m apart when not playing on the field unless from same household
PLEASE DO NOT ARRIVE MORE THAN 15 MINUTES BEFORE YOUR GAME
PLEASE REMAIN IN YOUR CAR UNTIL THE DIAMOND IS FREE FOR YOUR GAME
AFTER YOUR GAME PLEASE LEAVE THE FACILITY IN A TIMLY FASHION NO CONGREGATING IN THE PARKING LOT
  • Player General Protocols
  • No handshakes, team huddles, high fives, etc. not allowed. Suggest a new show of respect for the opposition at safe distance.
  • No bat girls/boys permitted
  • Ball Control Defensive team will supply their own game balls while in the field to reduce contact with individuals on the opposing team no one on the offensive team to retrieve or touch games ball. Consideration should be made for safe ball retrieval (homeruns, foul balls) defensive team only Game Balls may require consistent sanitization (by team every half inning) consider how often for practices. Put more game balls into play and have a designated person on each bench “sanitize” the game ball. This would require clean water and soap. Foul ball must be retrieved by the defensive team only Each team is responsible for cleaning their games balls between innings and will be the supplier of the same while on defense, umpires will not handle the balls at any point.
  • Tag Plays and Sliding
  •  Incidental contact, such as tagging or sliding into a base, is considered part of the game and is permitted.
  • BASE COACHES ARE PERMITTED BUT MUST MAINTAIN 3m distance. Recommend not coaching on the opposing teams baseline
 
Player’s Equipment 
  • No gloves to be on fence, player’s bags to be distanced, no bringing out gloves, batting gloves.
  •  Players should be reminded to reduce the amount of shared equipment and attempt to keep each individuals equipment isolated to reduce coming into contact with the equipment of other players. Protective Face Masks/Helmets
  •  There should be no sharing of protective face masks or helmets at any time. Face Masks/Gators/Bandanas
  •  Face coverings for the purpose of reducing potential virus transmission are recommended but not mandatory as long as physical distancing can be maintained.
  • NO SHARING OF BATS, UNLESS THE SAME HOUSEHOLD OR SANTIZED AFTER EACH USE
Captains
ACTIVE SCREENING WILL BE MANDATORY TEAM REPS WILL BE RESPONIBLE TO CHECK THEIR PLAYERS IN AND SCREEN FOR COVID 19.
THERE WILL BE NO SUBSTITUE PLAYERS FROM OTHER TEAMS YOU MUST PLAY SHORT OR FORFIET THE GAME
CAPTAINS SHOULD WIPE DOWN BENCHES AND OPENINGS TO DUGOUTS BEFORE AND AFTER THE GAME SUPPLIED BY YOUR TEAM
Screening (Contact Tracing) is mandatory for all team personnel, administrators, umpires and spectators.
Captains will be responsible to keep track of their players behaviors and following covid protocols
Captains will submit scores and rosters to [email protected] after everygame both teams must comply
Captains will be responsible for bringing cleaning supplies
 
Key Notes:
Non-medical face masks including gaiters/bandannas are highly recommended but not mandatory where 3 metres distancing can not be maintained.  Catcher/batter/umpire are considered incidental contact so highly recommended but not required.  Incidental contact is defined as contact of 15 minutes or less.
UMPIRES
· All Umpires must carry a face mask with them at all times for use whenever may be required. Catcher and Home Plate Umpire
· To ensure a maintenance of safe distance, Umpires will be required to utilize an exaggerated inside/outside slot position as long as the Umpire has the ability to perform their duties as the home plate umpire from these positions.
· To ensure a maintenance of safe distance, Umpires will be required to utilize an exaggerated inside/outside slot position as long as the Umpire has the ability to perform their duties as the home plate umpire from these positions.
· In situations where appropriate distance cannot be accommodated (for example, due to field size), Umpires may be required to wear masks.
Other
ALL DOUBLE HEADERS WILL BE AGAINST THE SAME TEAM TO LIMIT EXPOSURE BETWEEN TEAMS IN A SINGLE WEEKEND
KEEPING SCORE- WE WILL NOT BE EXCHANGING SCORE BOOKS BUT PLEASE EXCHANGE ORDERS OVER A 3m distance between reps
More information: https://slopitch.org/node/226
https://covid-19.ontario.ca/self-assessment/
https://www.ontario.ca/page/covid-19-safety-checklist-workplaces
https://covid-19.ontario.ca/screening/customer/symptoms
IF SHOWING ANY SYMPTOMS OR ILNESS PLEASE STAY HOME
Captains please sign and date that all team members have read and acknowledged these return to play protocols

Chris Butcher
705-627-5456
[email protected]
Injection Depot Group,  all Rights reserved 2017

  • Home
    • Product Line Card
  • Used Equipment
    • Injection Moulding Machines >
      • Horizontal >
        • Arburg >
          • Use our Arburg Network
          • 2010 Arburg 570S 2200-400/170
        • Ube >
          • Use our Ube Network >
            • 1999 UBE UM 1000ton
            • 2000 UM720 UBE
            • 2010 UBE UZ 1500 Z-MAX Series
        • Boy >
          • Use our Boy Network
          • ​1991 Boy 50 Ton Machine
          • ​2013 BOY 55E & ​2014 BOY 100E
        • Engel >
          • Use our Engel Network
          • 1997 400 Ton Engel
          • 1997 ENGEL ES750
          • 1998 500-Ton Engel
          • 1999 990 WP Ton Engel Injection Molding Machine
          • 2000 ENGEL ES2750/500AH
          • 2001 ENGEL ES2750/500AH
          • 2004 550 Ton Engel
          • 2005 610 Ton Engel
          • 2006 Engel Speed 200/45 5.6 oz/ps​
          • 2008 Engel EVC 440/240
        • Husky >
          • Use our Husky Network
          • 1999 300 Ton Husky Injection Molding Machine
          • 2006 Husky Q2350 ILC Husky Injection Molding Machine
        • Mitsubishi >
          • Use our Mitsubishi Network
          • 1990 610 ton Mitsubishi
          • 1999 1450 TON MITSUBISHI 220 OZ
        • Nissei >
          • Use our Nissei Network
          • 1998 Nissei FN3000
          • 2006 400 TON NISSEI FN360-100A
        • Sumitomo >
          • Use our Sumitomo Network
          • USED 495 TON, 33.2 OZ SUMITOMO MODEL SE450HD- 1700 ELECTRIC INJECTION MOLDING MACHINE MFG NEW IN 2007
        • Toshiba >
          • 1997 ISG250N-10A Ton Toshiba
          • 1997 ISG500-Ton Toshiba
          • 1998 ISGT 950WV10-81AM Ton Toshiba
          • 2003 1430 TON TOSHIBA ISG1450D-110A
          • 2002 Toshiba ISF1750DV10-110A
          • 2000 TOSHIBA ISGS-610-WV10-59B
          • 2004 ISG950WV10-59B Toshiba
          • 2004 ISG950WV21-59B Toshiba
          • 2005 Toshiba ISGS390W
          • 2015 ISGS500WV50-27AT Toshiba
          • 2016 TIA110SV50-5A Toshiba
          • 2019 EC610SXIIV50-24AT Toshiba
        • WOOJIN >
          • 2014 650 TON WOOJIN DL650S
      • Vertical >
        • Milacron >
          • 2011 130ton Milacron Vertical Rotary
        • Engel >
          • 2001 150 Ton Engel ES330/150VV
          • 2014 50 Ton Engel
      • All Electric >
        • Nissei >
          • Use our Nissei Network >
            • 2005 198 TON NISSEI NEX4000-36E
        • Sumitomo >
          • Use our Sumitomo Network
          • 2007 495 TON Sumitomo Machine SE450HD
          • 2002 Used Sumitomo SE50D
        • TOSHIBA >
          • Use our Toshiba Network
          • 2018 610 TON TOSHIBAT EC610SX-36AT
          • 2017 1950 TON TOSHIBAT EC1950SX-155AT
          • 2016 500 TON TOSHIBAT EC500SX-26AT
          • 2007 TOSHIBA EC45V30-1.5Y
          • 2007 TOSHIBA EC110NIIV30-4A
          • ​2005 TOSHIBA EC240V21-8
          • 2004 ISG950WV21-59B Toshiba
          • 2004 Toshiba EC240V21-8Y
          • 2003 ALL ELECTRIC TOSHIBA EC310V21-8B
          • 2002 TOSHIBA ec500-26B
          • 2002 Toshiba EC65
          • 2003 Toshiba EC45
      • MULTI SHOT >
        • use our MULTI SHOT Network
      • LIM/RUBBER >
        • 2008/6 EC110NIIV30-2A TON TOSHIBA
      • Machines Sold >
        • Sold- 2016 ENGEL VICTORY 3550/560 TECH US
        • Sold 2011 ENGEL E-VICTORY 310/130
        • Sold 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2006 180 TON 11.5 OZ TOSHIBA EC180NIIV-30-6
        • Sold - 2008 500 TON 56.8 OZ TOSHIBA EC500NVIIV30 26B
        • Sold - 2004 500 TON 56.7 OZ TOSHIBA EC500V21 26B
        • Sold - 2001 400 Ton Engel Injection Molding Machine
        • Sold -1999 750 Ton Engel Injection Molding Machine
        • Sold - 2-1997 110 Ton Nissei Injection Molding Machine
        • Sold - 2004 ENGEL ES 1050/200 TL
        • Sold - 2003 610 TON TOSHIBA ISG610V21-59B
        • Sold - 2012 143 TON TOSHIBA EC140SXV50-U34
        • Sold 2-1999 80 Ton Nissei Injection Molding Machine
        • Sold 2000 200 Ton JSW Injection Molding Machine
        • Sold 2000 500 Ton Husky Injection Moulding Machine
        • Sold 2000 2000 Ton Engel Injection Molding Machine
        • Sold 1998 238 Ton Nissei Injection Molding Machine
        • Sold 2000 154 Ton Nissei Injection Molding Machine
        • Sold 1996 250 Ton Engel Injection Molding Machine
        • Sold 2001 130 TON Battenfeld Injection Molding Machine
        • Sold 2002 110 TON Battenfeld Vertical/Vertical Injection Molding Machine
        • Sold 2001 90 Tons Engel Vertical/Vertical Injection Molding Machine
        • Sold 2002 125 Ton Vertical Engel Injection Molding Machine
        • Sold 1999 110 Ton BattenFeld Vertical / Vertical
        • Sold IMI Online Auction Closed
    • Robots >
      • Engel >
        • Use our Engel Network
        • 2005 Engel Servo Robot
      • Ranger >
        • Use our Ranger Robot Network
        • 2005 Ranger Robot
      • Yushin >
        • Use our Yushin Robot Network
        • Two 2008 ATB-150S Yushin Robots
        • 2010 RA-1300 Yushin Robot
      • Sepro >
        • 2006 Sepro Robot SR4030 S3
        • 2006 SEPRO Axess 10 S3 3-Axis Servo
        • 2011 SEPRO AXESS 33
    • Auxiliary >
      • Core Pull Valve Gate >
        • use our Valve Gate network
        • CPI Automation Ltd.
      • Air Compressor >
        • use our Air Compressor network
        • QUINCY QSF100-125 WITH PURESTREAM DRYER
      • Dryers >
        • Use our Dryers Network
        • Thermal-D Dryer THORESON MCCOSH INC.
        • 2010 Conair Courasel Dryer
        • 2012 Novatec 600 Dryer
        • 2013 NW-3800DC NOVATEC DRYER
        • 2017 Novatec / Dri-Air HP4-X 100 FM Drying System
      • Granulators >
        • use our Granulators network
        • 1997 Rapid Granulator
      • Temperature Control Units >
        • use our Temperature Control Units
        • 2005 Regloplas 150S Oil Temperature Controller
        • 2011 Gammaflux TTC-32795 Temperature Control Unit
        • 2014 Gammaflux G24-37394P
      • Hot Runner Controllers >
        • use our Hot Runner Controllers network
        • 2002 Acetronic MF-5Z
      • Chillers >
        • use our chiller network
        • 2004 AEC 20 Ton Air Cooled Chiller For Sale
        • ​2017 Frigel Microgel Rad 40/12
      • Conveyor & Separator
    • Miscellaneous >
      • (3) USED 5 GALLON 70 MIL SINGLE CAVITY BUCKET MOLD
    • Are You Selling Equipment? >
      • Are You Selling your IMM
      • Are You Selling your Robot?
      • Are You Selling your Dryer?
    • Looking for Used IMM
  • New Shibaura IMM
    • EC-SX Introduction
    • Customer Support >
      • Shibaura Training 2020
    • V70 Controller
    • Shibaura Machine Technical Center >
      • MoldTrial
    • Downloads >
      • FAQ
      • 15 Things to Know About Servo-Driven Injection Machines
      • Cycle Time Power
    • Shibaura Machine Warranty
    • Electric vs hydraulic
    • All Electric "Small" >
      • EC30SXII (30 Ton)
      • EC55SXIII (55 Ton)
      • EC85SXIII (83 Ton)
      • EC110SXIII (110 Ton)
      • EC140SXIII (143 Ton)
      • EC200SXIII (198 Ton)
      • EC250SXIII (253 Ton)
      • EC310SXIII (310 Ton)
      • EC390SXII (385 Ton)
    • All Electric "Medium/Large" >
      • EC500SXIII (500 Ton)
      • EC610SXIII (610 Ton)
      • EC720SXIII (720 Ton)
      • EC950SXIII (950 Ton) >
        • EC950SXIII (950 Ton) Specs
      • EC1100SXIII (1000 Ton)
      • EC1450SXIII (1300 Ton)
      • EC1950SXIII (1800 Ton)
      • EC2750SXIII (2500 Ton)
    • Machine Sizing
  • New Sepro Robots
    • Sepro Robot Introduction
    • Customer Support >
      • Sepro Training 2020
    • Sepro Controller
    • 3 Axis Robots >
      • Picker
      • Success
      • Strong
      • S5 Line
      • S5 Speed Line
      • S7 Line
    • 5 Axis Robots >
      • 5X Line
      • 7X Line
      • Success X
    • 6 Axis Robots >
      • Sepro - Stäubli
      • Sepro - Yaskawa
    • Sepro Media
    • Robot Sizing
  • Moretto Aux
    • Moretto Customer Support
    • Feeding and Conveying >
      • Single-Phase Hopper Loaders
      • Venturi Feeders
      • Containers - Receivers
      • Conveying sizing
    • Drying and Hot Air Drying >
      • Mini Dryers
      • X Dryer
      • Eureka (Central System)
      • OTX Hoppers >
        • OTX pictures
      • Sizing
    • Dosing & Blending >
      • Volumetric Dosing Units >
        • Volumetric Sizing
      • Gravimetric Dosing Units >
        • Gravimetric Dosing Sizing
    • Moisture meter
  • Cumberland-Plastics
  • Frigel-Plastics
    • Water Temperature Controllers >
      • Turbogel
      • HB-THERM THERMO-5
    • MACHINE-SIDE TCU/CHILLER COMBINATION >
      • MICROGEL WATER COOLED
      • MICROGEL MICROGEL™ AIR COOLED
      • MICROGEL/TURBOGEL SIZING APPLICATION
  • Moretto downloads
  • Magbo Magnetic Platens
    • Pictures
    • Magbo Sizing
    • Magbo Take The Challenge
  • MoldMasters
  • SRS Low Speed Grinders
    • SRS video
    • 5 Reasons Why You Need A SRS Bi-Cutter Screenless Granulator
    • SRS sizing
  • Intertek
  • Government Grant Initiative Program
  • Energy Saving Grants
  • NPE 2018
  • I.D Internal
  • IDG Members